3 piece Forged steel fixed ball valve
Product Description
Product Detail
Milestone the following is an introduction to 3 piece Forged steel fixed ball valve, I hope to help you better understand 3 piece Forged steel fixed ball valve. Welcome new and old customers to continue to cooperate with us to create a better future together! 3 piece Forged steel fixed ball valve is a new generation of high-performance ball valve, mainly used for high pressure and large diameter, suitable for long-distance transmission pipeline and general industrial pipeline. Its strength, safety and harsh environment resistance are specially considered in design, and are suitable for various corrosive and non-corrosive media. The advanced steel fixed ball valve produced by MST is of high quality in structure and sealing, and is widely used in natural gas, oil, chemical industry, metallurgy, urban construction, food and other industries.
Parameters for the 3 piece Forged steel fixed ball valve:
Product Name |
3 piece Forged steel fixed ball valve |
DN |
DN50~DN1200 |
PN(MPa) |
1.6Mpa~32.0Mpa |
Temperature Range |
-20℃-180℃ |
Body |
Forged steel,WCB Cast steel, Stainless Steel |
Connection type |
Flanged |
Actuator type |
Manual drive, Pneumatic, Hydraulic or electric Actuator |
Standard |
GB、DIN、API、ANSI |
Applicable Medium |
Water, oil, gas, and various corrosion medium |
1) The structure of the 3 piece Forged steel fixed ball valve: the ball valve with fixed shaft is called fixed ball valve. The 3 piece Forged steel fixed ball valve is mainly used for high pressure and large caliber. According to the different installation of the sealing ring, there are two structures: the valve seat sealed in front of the ball and the valve seat sealed after the ball;
2) The whole structure of 3 piece Forged steel fixed ball valve: it has the characteristics of full channel, emergency seal and fire protection.
3) The diameter of the valve channel hole is consistent with the diameter of the pipe and diameter, and is better than the pipeline cleaning.
4) Blocked and discharged by 3 piece Forged steel fixed ball valve: when the valve is closed, the valve seat at the upstream and downstream side blocks the fluid, and the accumulated substances in the valve body cavity can be discharged. The discharge device is as follows:
① Check whether the valve seat is leaking or damaged before the time;
② Reduce the pollution of medium replacement on valve;
③ Under working pressure, when the valve is in full open or fully closed state, the valve stem packing box can be replaced.